In the modern packaging industry, Bags on Roll Making Machines play a crucial role. To ensure the efficient and safe operation of the equipment and extend its service life, operators need to strictly abide by a series of precautions.
Pre - start Preparation
Comprehensive Inspection: Carefully check all components of the equipment to ensure that there are no loose, damaged, or missing parts. Pay special attention to key parts such as transmission components, heating devices, and electrical circuits. For example, check whether the tension of the transmission chain is appropriate, whether the heating rods show signs of damage, and whether there are risks of damage or short - circuits in the electrical circuits.
Material Preparation: Prepare raw materials that meet the specifications according to production requirements, such as plastic films, printing inks, etc. Ensure that the quality of the raw materials is qualified to avoid poor bag - making quality or equipment failures due to material problems. At the same time, pay attention to the storage environment of the materials to
prevent moisture absorption and oxidation.
Parameter Setting: Accurately set various parameters of the equipment, such as temperature, speed, and pressure, according to the requirements of bag size, thickness, and material. Different materials and bag - making specifications require different parameters. Incorrect setting may affect the quality and efficiency of bag - making.
Operational Key Points during Operation
Real - time Monitoring: During the operation of the equipment, the operator should always pay attention to the operating status of the equipment, including changes in parameters such as temperature, pressure, and speed, as well as the quality of the bags being made. If abnormal temperature fluctuations are found, it may indicate a malfunction of the heating device; if problems such as bag wrinkles or poor sealing occur, adjust the parameters or check the equipment in a timely manner.
Safety Protection: Strictly abide by safety operation procedures and wear personal protective equipment, such as safety helmets and protective gloves. It is strictly prohibited to reach into the rotating parts with hands or other parts of the body while the equipment is running to avoid mechanical injury accidents. At the same time, ensure that the safety protection devices of the equipment are in good condition and effective, such as emergency stop buttons and protective fences.
Timely Cleaning: Regularly clean the debris and dust on the surface and inside of the equipment to prevent them from entering the equipment and affecting normal operation. In particular, the scraps and debris generated during the bag - making process should be cleaned up in a timely manner to avoid accumulation and potential malfunctions.
Maintenance after Shutdown
Equipment Cleaning: After shutting down the equipment, conduct a comprehensive cleaning of the equipment, including the fuselage, transmission components, heating devices, etc. Use appropriate cleaning agents and tools to remove oil stains, dust, and residual raw materials on the surface of the equipment. Note that overly sharp or hard tools should not be used to avoid scratching the surface of the equipment.
Component Inspection and Maintenance: Check all components of the equipment, such as transmission chains, gears, bearings, etc. If there are signs of wear or looseness, replace or adjust them in a timely manner. Check the heating device to ensure that components such as heating rods and temperature controllers are working properly. At the same time, check the electrical circuits to prevent problems such as aging and short - circuits.
Regular Maintenance: Develop a regular maintenance plan for the equipment and carry out maintenance work according to the plan. Regular maintenance can include replacing vulnerable parts, adding lubricating oil, calibrating equipment parameters, etc., to ensure that the equipment is always in good operating condition.
Proper use and maintenance of Bags on Roll Making Machines can not only improve production efficiency and product quality but also ensure the safety of operators and extend the service life of the equipment. Every operator should strictly abide by these precautions to provide strong support for the production and operation of the enterprise.
GET A QUOTE
.jpg)
